Skip to content

Manga Tone Shader

A render made with the Manga Tone Shader

MTS · Material › Manga Tone Shader (Lite: …)

A shader that reads the color channels of the lights separately and paints a different tone for each: where the key (red), fill (green) and back (blue) lights hit. When you check a feature, the shader is automatically swapped for a lightweight group that contains only the features you use.

Layer stack

The layers stack from the bottom up into one final shading. The label at the top right is how each layer is combined (blend mode).

Node tree

Image Texture
Matte toneNormal → Vector Transform → Mapping
Image Texture
AO maskUV → Mapping
Image Texture + Normal Map
Normal map
Image Texture
Transparent PNG (alpha)
Manga Tone Shader (Lite: …)
Base / Key / Fill / Back tonesNormals, shadows, highlights, matte, watercolor, transparency…Lightweight version with only the checked features
Material Output
Surface
1Read the lightsDiffuse → Shader to RGB → Separate Color pulls out how the red, green and blue lights hit, one by one
2Split into stepsEach of the three values is cut into steps (Map Range) for crisp light and dark. The offsets move the borders
3Layer the tonesTones (colors or patterns) are layered in the order Base → Key → Fill → Back
4Add effectsShadow, sub outline, AO, gloss, rim light and matte are layered on top
5FinishWatercolor → color (variation and paper) → output

Light Linking decides which objects each light illuminates. If the character is not in a light group's "Lit Objects", it renders solid black.

Inputs

The five spheres (or eyes, mouths, skies) show the value changing from left to right. The values are written under the image. The yellow cell is the default value for that setting, and all other settings stay at their defaults.

All Manga Tone Shader settings
Panel Setting UI name Default
Base Base Tone Base Tone Color
Base Key Light Offset Key Light Offset 3
Base Fill Light Offset Fill Light Offset 3
Base Back Light Offset Back Light Offset 1
Shadow Shadow Opacity Shadow Opacity 1
Shadow Brightness Brightness 0.5
Shadow Contrast Contrast 1
Sub Outline Opacity Opacity 0.5
Sub Outline Size Size 0.5
Sub Outline Shadow Size Shadow Size 0.2
AO Opacity Opacity 1
AO Intensity Intensity 1
Gloss Opacity Opacity 0.5
Gloss Brightness Brightness 0.5
Gloss Contrast Contrast 1
Gloss Spread Spread 0.1
Gloss Offset X Offset X 0
Gloss Offset Z Offset Z 0
Anisotropy Opacity Opacity 0.5
Rim Light Opacity Opacity 0.5
Rim Light Contrast Contrast 1
Rim Light Width Width 0.014
Rim Light Offset X Offset X 0
Rim Light Offset Z Offset Z 0
Matte Opacity Opacity 1
Matte Brightness Brightness 0.1
Matte Contrast A Contrast A 0.5
Matte Contrast B Contrast B 0.5
Brush Strokes Stroke Strength Stroke Strength 0.3
Brush Strokes Stroke Scale Stroke Scale 3
Brush Strokes Stroke Stretch Stroke Stretch 4
Brush Strokes Stroke Angle Stroke Angle 35
Brush Strokes Stroke Edge Stroke Edge 0.5
Color (Variation & Paper) Color Variation Color Variation 0.057
Color (Variation & Paper) Value Variation Value Variation 0
Color (Variation & Paper) Paper Paper 0.812
Watercolor Bleed Bleed 0.5
Watercolor Bleed Scale Bleed Scale 12
Watercolor Edge Darkening Edge Darkening 0.5
Watercolor Granulation Granulation 0.3
Watercolor Wash Wash 0.15
Transparency Alpha Clip Alpha Clip 0.5

Base

Base ToneBase ToneColorTone Material

The color or pattern of the area no light reaches (the underside of the sphere). Drop a material from the bundled tone assets (Manga Tone Flat / Manga Tone Shaded) below the color field to use its pattern.

Manga Tone Flat (flat tones): The pattern fills the whole area as is.

Base Tone set to a solid color, Screentone Dots, Screentone Sand, Screentone Parallel Lines and Screentone Crosshatch A
SolidDotsSandLinesCrosshatch A

Manga Tone Shaded (shaded tones): The pattern density changes with how the light hits: lighter on the bright side, denser on the dark side.

Base Tone with the shaded versions of Screentone Dots, Sand, Parallel Lines, Crosshatch A and Pencil Layered Crosshatch
Dots (Shaded)Sand (Shaded)Lines (Shaded)Crosshatch A (Shaded)Pencil (Shaded)
Key Light OffsetKey Light OffsetDefault 3Compared 1 → 6.5

The border of the area the key light (red) hits. The higher the value, the smaller the key tone area and the larger the shadow side. The image uses a red key tone.

Key Light Offset set to 1, 2, 3, 4.5 and 6.5
1234.56.5
Fill Light OffsetFill Light OffsetDefault 3Compared 1 → 6.5

The border of the fill light (green) area. Raising it shrinks the midtone area and adds more dark area. The image uses a green fill tone.

Fill Light Offset set to 1, 2, 3, 4.5 and 6.5
1234.56.5
Back Light OffsetBack Light OffsetDefault 1Compared 1 → 6.5

The width of the back light (blue) rim. The higher the value, the thinner the edge from behind; at 6.5 it almost disappears. The image uses a blue back tone.

Back Light Offset set to 1, 2, 3, 4.5 and 6.5
1234.56.5

Shadow

Shadow OpacityShadow OpacityDefault 1Compared 0 → 1

How dark the shadows cast by other objects are. 0 means no shadows.

Shadow Opacity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
BrightnessBrightnessDefault 0.5Compared 0 → 1

The threshold that sets the shadow area. Raising it makes the shadows larger. With Contrast at 1 you see almost no change, so the image uses Contrast 0.3.

Brightness set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
ContrastContrastDefault 1Compared 0 → 1

How sharp the shadow border is. At 0 everything is in shadow; the higher the value, the clearer the border.

Contrast set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

Sub Outline

OpacityOpacityDefault 0.5Compared 0 → 1

How strong the colored line just inside the outline is (blue by default).

Opacity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
SizeSizeDefault 0.5Compared 0 → 1

The thickness of the sub outline.

Size set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
Shadow SizeShadow SizeDefault 0.2Compared 0 → 1

How far it spreads into the shadow side. Raise it and the whole shadow area takes the sub outline color.

Shadow Size set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

AO

OpacityOpacityDefault 1Compared 0 → 1

How dark the shading is in hollows and recessed areas (around the eyes, inside the ears, under the chin). The image uses a model with many hollows and a light body color.

Opacity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
IntensityIntensityDefault 1Compared 0 → 1

How far the dark areas spread. The higher the value, the further they spread out from the hollows.

Intensity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

Gloss

OpacityOpacityDefault 0.5Compared 0 → 1

How strong the highlights are.

Opacity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
BrightnessBrightnessDefault 0.5Compared 0 → 1

How much area the highlights cover. At 1 the whole surface becomes bright.

Brightness set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
ContrastContrastDefault 1Compared 0 → 1

How sharp the highlight edges are. Lower it and they blur and spread over the whole surface.

Contrast set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
SpreadSpreadDefault 0.1Compared 0 → 0.8

The size of each individual highlight.

Spread set to 0, 0.1, 0.25, 0.5 and 0.8
00.10.250.50.8
Offset XOffset XDefault 0Compared -1 → 1

Moves the highlights left or right.

Offset X set to -1, -0.5, 0, 0.5 and 1
-1-0.500.51
Offset ZOffset ZDefault 0Compared -1 → 1

Moves the highlights up or down.

Offset Z set to -1, -0.5, 0, 0.5 and 1
-1-0.500.51

Anisotropy

OpacityOpacityDefault 0.5Compared 0 → 1

A streaky highlight, like the "angel ring" on hair. The band runs along the vertical UV direction and shines on the side the key light hits. The streak takes the tone color (the image uses a white tone).

Anisotropy Opacity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

Anisotropy expects a clean UV unwrap

The streak follows the vertical UV direction, so it assumes UVs laid out in a consistent direction. For hair, start the shape from a UV Sphere primitive: its UVs already run top to bottom, so the angel ring follows the head. Hair made by sculpting or remeshing, or left with an automatic unwrap (such as Smart UV Project), has UVs facing every which way, and the streak breaks up or runs at an angle.

Effect of the UV unwrapSame shape, same settings

Both are the same hair shape made from a UV Sphere, with the same anisotropy settings. Left: UVs split into small islands with Smart UV Project, each turned to a random angle. Right: the UV Sphere's own UVs.

With Smart UV Project the streaks break up sideways; with the UV Sphere's UVs they line up vertically into an angel ring
UVs split up and turned at randomUV Sphere as is (UVs run top to bottom)

Rim Light

OpacityOpacityDefault 0.5Compared 0 → 1

How strong the bright edge along the silhouette is (with Width 0.8).

Opacity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
ContrastContrastDefault 1Compared -1 → 1

The border of the edge. Negative values spread the edge over the whole inside.

Contrast set to -1, -0.5, 0, 0.5 and 1
-1-0.500.51
WidthWidthDefault 0.014Compared 0 → 0.2

The thickness of the edge (with Opacity 1).

Width set to 0, 0.02, 0.05, 0.1 and 0.2
00.020.050.10.2
Offset XOffset XDefault 0Compared -1 → 1

Shifts the direction of the edge left or right. Negative values thicken the left edge, positive values the right edge (with Width 0.2 and Opacity 1).

Offset X set to -1, -0.5, 0, 0.5 and 1
-1-0.500.51
Offset ZOffset ZDefault 0Compared -1 → 1

Shifts the direction of the edge up or down. Negative values thicken the bottom edge, and at -1 the whole sphere is covered. Positive values thin the bottom edge and move it toward the top (with Width 0.2 and Opacity 1).

Offset Z set to -1, -0.5, 0, 0.5 and 1
-1-0.500.51

Matte

OpacityOpacityDefault 1Compared 0 → 1

How strong the matte tone (texture layer) is. The tone takes a matcap image mapped by the camera-space normals (the image uses a crystal-pattern matcap; the shader uses the image's brightness, so it comes out black and white).

Opacity set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
BrightnessBrightnessDefault 0.1Compared -0.1 → 0.2

The brightness of the matte layer. Ten times the value is added as brightness, so small changes make a big difference. Negative values darken it, positive values make it whiter.

Brightness set to -0.1, -0.05, 0, 0.1 and 0.2
-0.1-0.0500.10.2
Contrast AContrast ADefault 0.5Compared 0 → 1

The gamma (power) of the matcap image. The higher the value, the deeper the dark side and the stronger the shading.

Contrast A set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
Contrast BContrast BDefault 0.5Compared 0 → 1

The contrast of the matte layer. The higher the value, the clearer the difference between light and dark.

Contrast B set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

Brush Strokes

Stroke StrengthStroke StrengthDefault 0.3Compared 0 → 2

How strongly the light/dark border is broken up like brush marks.

Stroke Strength set to 0, 0.5, 1, 1.5 and 2
00.511.52
Stroke ScaleStroke ScaleDefault 3Compared 1 → 8

The size of the brush marks. The higher the value, the finer the strokes.

Stroke Scale set to 1, 2, 3, 5 and 8
12358
Stroke StretchStroke StretchDefault 4Compared 1 → 50

The aspect ratio of the brush marks. Raise it for long, thin strokes.

Stroke Stretch set to 1, 4, 10, 25 and 50
14102550
Stroke AngleStroke AngleDefault 35Compared -90 → 90

The direction of the strokes (in degrees).

Stroke Angle set to -90, -45, 0, 45 and 90
-90-4504590
Stroke EdgeStroke EdgeDefault 0.5Compared 0 → 1

How hard the stroke edges are. At 1 the brush marks disappear and the original border comes back.

Stroke Edge set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

Paint Finish

Color VariationColor VariationDefault 0.057Compared 0 → 1

Varies the color from patch to patch of paint. When the tone is black and white (grayscale), you will barely see any change.

Color Variation set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
Value VariationValue VariationDefault 0Compared 0 → 1

Varies the brightness from patch to patch.

Value Variation set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
PaperPaperDefault 0.812Compared 0 → 1

How strong the paper grain (roughness) is. The image uses a light tone with Paper Scale 30 and Screen-Space Paper 0.

Paper set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

Watercolor

BleedBleedDefault 0.5Compared 0 → 1

How much the light/dark border bleeds.

Bleed set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
Bleed ScaleBleed ScaleDefault 12Compared 2 → 80

The size of the bleed pattern. The higher the value, the finer it gets.

Bleed Scale set to 2, 6, 12, 30 and 80
26123080
Edge DarkeningEdge DarkeningDefault 0.5Compared 0 → 1

How much paint pools at the edges and darkens them.

Edge Darkening set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
GranulationGranulationDefault 0.3Compared 0 → 1

The graininess of the pigment particles.

Granulation set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751
WashWashDefault 0.15Compared 0 → 1

Lightens everything, as if thinned with water.

Wash set to 0, 0.25, 0.5, 0.75 and 1
00.250.50.751

Transparency

Alpha ClipAlpha ClipDefault 0.5Compared 0.1 → 0.9

Cuts out the parts where the PNG's alpha is below this value. The image shows a flat polygon with a star-shaped PNG whose alpha is strongest at the center. The higher the value, the more the thin parts are trimmed away and the smaller the shape gets.

Alpha Clip set to 0.1, 0.3, 0.5, 0.7 and 0.9
0.10.30.50.70.9