Skip to content

Scene: Setting the Stage for a Panel

The first button to press is "Create 3D Manga Collection". It sets up where the foreground, characters, background, camera and speech balloons go, and every button after that sorts new items into this structure automatically.

Create 3D Manga Collection

Scene panel

Sidebar › Scene

Outliner

  • 3D Manga Collection
    • A: Stage
      • 0: Foreground Effects — impact bursts, sparks, etc.
      • 1: Characters / Objects
      • 2: Background Effects — focus lines, magic circles, etc.
    • B: Lighting — three lights
    • C: Background / World
    • D: Camera
    • E: Speech Balloons — toggle their visibility all at once

You can keep your existing Outliner contents, or delete them and start over. When you add an effect, it goes to its default place (foreground or background), and you can move it to the other list later.

Tip

Put your characters in "1: Characters / Objects". Light Linking and the outline list can then handle them per collection, which makes things easier.

Camera · Lens Details · Resolution · Guides

Set up the camera from the paper size and the panel shape. The presets cover full A-size and B-size pages, plus panels that split the page vertically or horizontally into 1/2 to 1/6. The resolution and guides are set in one go, and the panel division lines appear in the camera frame.

A-size (full page)
B-size (full page)
A-size vertical 1/3
A-size horizontal 1/4

Camera panel

Scene › Camera
Subpanel What it does
Camera Set as the scene camera, switch to camera view, reload the preset
Lens Details Focal length (strength of perspective), clip range, etc.
Resolution Resolution matched to the paper size and panel ratio
Guides Safe areas, layout guides, column and row division lines with their color and width

Resolution Presets

Resolutions are the size when printed at 600 dpi. "Vertical" splits the page top to bottom into wide panels; "horizontal" splits it side to side into tall panels. Every preset has a 500 px safe area (about 21 mm on paper).

Preset Resolution (px) Size on paper (mm)
A-size (full page, A4) 4,961 × 7,016 210 × 297
A-size vertical 1/2 4,961 × 3,508 210 × 149
A-size vertical 1/3 4,961 × 2,339 210 × 99
A-size vertical 1/4 4,961 × 1,754 210 × 74
A-size vertical 1/5 4,961 × 1,403 210 × 59
A-size horizontal 1/2 2,480 × 7,016 105 × 297
A-size horizontal 1/3 1,654 × 7,016 70 × 297
A-size horizontal 1/4 1,240 × 7,016 52 × 297
A-size horizontal 1/5 992 × 7,016 42 × 297
A-size horizontal 1/6 827 × 7,016 35 × 297
Preset Resolution (px) Size on paper (mm)
B-size (full page, B4) 6,071 × 8,598 257 × 364
B-size vertical 1/2 6,071 × 4,299 257 × 182
B-size vertical 1/3 6,071 × 2,866 257 × 121
B-size vertical 1/4 6,071 × 2,150 257 × 91
B-size vertical 1/5 6,071 × 1,720 257 × 73
B-size horizontal 1/2 3,035 × 8,598 128 × 364
B-size horizontal 1/3 2,023 × 8,598 86 × 364
B-size horizontal 1/4 1,518 × 8,598 64 × 364
B-size horizontal 1/5 1,214 × 8,598 51 × 364
B-size horizontal 1/6 1,012 × 8,598 43 × 364

Distortion Fix NEW

Fixes faces that get stretched near the edge of the frame when you shoot close up with a wide-angle lens. The camera stays as it is; only the face looks as if it was shot with a different lens.

Distortion Fix panel

Scene › Camera › Distortion Fix
  • Face Lens: even with an 18mm camera, the face looks like it was shot at 85mm
  • Pull Toward Camera: moves the face toward the camera so it looks bigger
  • Full-Effect Radius / Falloff Width: blends the fix naturally from the neck down
  • The center of the fix is parented to the head bone automatically, so it follows when you move the character

Register with "Register by Collection" or "+ Register Selected". Once every mesh in a collection is registered, they are automatically grouped into a single per-collection fix. Use 👁 in the list to turn the effect on and off, and "Highlight Registered" to highlight the targets in the viewport.

Try it

camera 18mmface 18mm

A 3D scene of the sample character (Zionre) shot with an 18mm camera. Drag the character (or the red arrow) left and right: the closer to the edge of the frame, the more the face stretches sideways. Raise "Face Lens" and only the face goes back to a telephoto-like shape, while everything from the neck down blends in and keeps the original perspective.

Lights

Lights panel

Scene › Lights

Each light group comes with a set of three lights. The shader reads the color channels of the light separately, so you can assign red, green and blue to different tone levels.

Key Light: the brightest surfaces. The main light that sets the shape of the shadows
Fill Light: the midtones inside the shadows. The second tone level
Back Light: a rim that lifts the outline. White highlights from backlighting

Use "Align Heights" and "Space Evenly in a Circle" to tidy up the layout. You can keep several groups in the list, so you can give each character its own lights.

Try it

Manga Tone Shader

Drag a light ball to move it along the dotted blue circle. Hold Shift and drag up or down to change its height. Drag on empty space to orbit the camera, and use the wheel to zoom in and out. Click an axis circle at the top right to view from that direction. Switch to "RGB" to see the color channels the shader reads (red = key, green = fill, blue = back). In "Tone", those channels become white, halftone-dot midtones and white backlight highlights.

Light Linking NEW

Manage the "Lit Objects" and "Shadow Casters" of the selected light group, each in its own list. This lets you keep character A's lights from hitting character B or the background.

Light Linking panel

Lights › Light Linking
  • +: adds the collection selected in the Outliner, or the selected objects if there is none
  • Collection button: pick a collection from a list and add it
  • −: removes the row selected in the list
  • Things without faces, such as empties and armatures, can't be added

If everything turns black

If the character isn't in the light group's "Lit Objects", Manga Tone Shader renders it solid black.